fbpx

With 2019’s planting season underway, the thought of harvest may seem a long way off. Yet, as with most things in life: preparation is key. There are many factors within viticulture that are beyond our control, but making considered decisions about equipment, efficiency and our ecological impacts allows us to prepare sufficiently for anything Mother Nature may throw at us.

A vital consideration is determining how you’ll get your freshly harvested grapes to
their winery destination – which style and size of picking crate will you use? For a simple picking crate, there are a surprising amount of aspects which should be contemplated from size, ease of handling and load capacity to manoeuvrability, stacking ability and ease of cleaning. The ultimate aim is to transport your fruit as quickly and safely as possible with minimum damage to the grapes and with
maximum efficiency.

There are two main types of picking crate available: small, handheld crates which are positioned at intervals along the vineyard rows and larger containers which are situated at the ends of rows. The smaller crates are useful for those with limited access to forklifts or quadbikes and trailers. Due to these being lifted by hand, it is important to consider manual handling techniques. You may initially think that the larger the crate, the more fruit you can fit in and the quicker you’ll be able to transport the grapes, however, if the crate is too large, (above 20kg load capacity) you not only risk the quality of the fruit being compromised by compression, but also encounter the risk of injuring your workforce through excessive weight lifting. Especially as each small crate needs to be individually tipped either into a larger container or straight into the press.

Schoeller Allibert’s Maxinest® picking crates are designed with ergonomic bale-arm handles, providing comfort and ease of lifting, no matter how many crates you have to carry throughout a day. These crates have a load capacity of 16kg, (35 litres volume capacity) and stack securely. This design ensures the fruit doesn’t cause
accidental crushing from its own weight and helps to prevent damage occurring in
transit. The ability to nest the crates inside each other avoids moving ‘fresh air’ on return journeys.

The slotted base and sides reduce the weight of each crate and allows insects/small animals to make their escape before heading to the press! The holes also aid efficient cleaning regimes, allowing excess water to drain fully before storing.

The ECO Maxinest® crates are produced from recycled plastic – “old inefficient crates are ground down in to plastic flakes which are washed and dried” prior to being reformed. This process generates minimal waste, creating a sustainable packaging cycle. The alternative option is to utilise larger picking containers, such as the Schoeller Allibert Maxilog®. These have a volume capacity of 610 litres and significantly increase speed of handling. Contrary to the above, the grapes will inevitably be slightly squashed under their own weight, but the solid container ensures that none of the vital free-run juice is lost. The solid sides prevent excess oxygen circulating which reduces the risk of the free-run juice spoiling.

The labour benefits of using a Maxilog are exponential. A larger size container means significantly fewer trips between the vineyard and the winery. These containers can be forklifted which gives fantastic manoeuvrability and saves time and labour distributing, (and collecting) individual crates among the vines.

An additional benefit of using a specific range of crates, all of which are the same size and shape, is that the tare weight of each crate is accurate and consistent.This is especially important for those getting their wine made by contract wineries. The final factor to consider is ensuring you source your picking crates well in advance of harvest!

Published in Vineyard Magazine – May 2019

You may be interested in these other recent articles

First Things to look for in a Site and Considerations for Future Expansion

1 October 2020

Planting the Industry As we all know, there is a real emphasis on selling our wines to international markets. The interest in British culture and…

Read more

Where to buy a vineyard in the UK

22 September 2020

Vine-Works Ltd are proud to have been mentioned in The Times Sunday newspaper on Sunday 20th September. When establishing a vineyard from scratch, James Dodson,…

Read more

Working with the GLAA at Harvest 2020.

1 September 2020

This year’s harvest looks to be an even more challenging affair than normal with the added complications of COVID-19 and the risks to workers. For…

Read more

Trellis Installation takes a Step into the Future!

1 August 2020

2020 saw another year of substantial plantings in the UK. It is estimated that approximately 1.5-1.8 million vines went in the ground this May which…

Read more

Now is the Time to Calculate your Yield Estimates.

1 July 2020

Understanding your yield estimates is the first step to planning your harvest. The sooner you can have an idea of numbers, the better! The first…

Read more

Let's have a conversation

Others may make the wine — but we make great coffee. Come and have a cup with us and we’ll talk about what you want to achieve. Or we’ll come to you, if you prefer. It won’t cost you anything and there’s no obligation. No hard sell, no hard feelings.

Contact us